LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1979 >> Ram 50 Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Idle Enrichment System >> Testing >> Time Delay Test

Time Delay Test

  1. With ignition switch off, remove wiring connector from time delay solenoid valve. Place a test light across connector terminals.
  2. Start engine, test light should come on and stay on for approximately 60 seconds after engine starts. If light does not come on or stays on indefinitely, replace timer.
    NOTE: Test light current draw should not exceed 0.5 amps. as damage to timer may occur.
scientia non olet · About LEMON Manuals