LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1973 >> Colt Base, Not Available, Not Available Trans >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat Controls >> Component Replacement >> Motor

Component Replacement: Motor

  1. With battery disconnected, remove nuts holding seat assembly to floor pan from under vehicle. Tilt seat and disconnect wiring harness.
  2. Lay seat on its back and remove bolt which holds motor to support. Remove mounting screws and carefully disconnect cable housings from motor assembly. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals