LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1969 >> P300 Not Available Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternators >> Testing (On Bench) >> Stator Test

Stator Test

CAUTION: Unsolder rectifier leads from stator leads before making the following test.

Test stator for grounds with a 110 volt test lamp. Insulate stator from rectifier shield. With one probe of test lamp on stator pole frame, touch each of stator leads with other probe. If lamp lights, stator windings are grounded. To test windings for continuity, touch one lamp probe to all three stator leads at "Y" connection and other probe to each of the three stator leads (disconnected from rectifiers). If lamp does not light at each of three rectifier leads, stator winding is open.

scientia non olet · About LEMON Manuals