LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2025 >> Pacifica Plug-In Hybrid Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Electronic Control Modules (Service Information)) >> Module, Emergency Assistance (EAM) >> Removal And Installation >> Emergency Assistance Module Speaker >> Removal

Emergency Assistance Module Speaker: Removal

WARNING: This page is about a different car, the 2025 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the defrost grille. Refer to GRILLE, DEFROSTER, REMOVAL AND INSTALLATION .
  3. Remove the two Emergency Assistance Module (EAM) speaker to instrument panel mounting screws (2).
    GC0179412Courtesy of CHRYSLER GROUP, LLC
  4. Pull the EAM speaker (1) away from the instrument panel far enough to disconnect the instrument panel wiring harness connector from the speaker.
  5. Disconnect the instrument panel wiring harness connector from the EAM speaker.
  6. Remove the EAM speaker (1) from the vehicle.
scientia non olet · About LEMON Manuals