LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2025 >> Pacifica Plug-In Hybrid Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Electronic Control Modules (Service Information)) >> Module, Emergency Assistance (EAM) >> Removal And Installation >> Backup Battery >> Removal

Backup Battery: Removal

WARNING: This page is about a different car, the 2025 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Emergency Assistance Module (EAM) from the vehicle. Refer to MODULE, EMERGENCY ASSISTANCE (EAM), REMOVAL AND INSTALLATION .
  2. Remove the EAM backup battery cover (3) from the EAM (1).
    GC0175234Courtesy of CHRYSLER GROUP, LLC
  3. Gently pull the backup battery (2) from the EAM (1) and disconnect the negative battery wire connector, then disconnect the positive battery wire connector.
scientia non olet · About LEMON Manuals