Removal And Installation

WARNING: This page is about a different car, the 2025 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The Adaptive Cruise Control (ACC) radar is serviced with the ACC bracket.

REMOVAL

Remove the front fascia. Refer to FASCIA, FRONT, REMOVAL AND INSTALLATION .
Remove the fasteners (1) securing the ACC bracket (2) with radar to the fascia.

Courtesy of CHRYSLER GROUP, LLC
Remove the ACC bracket (2) with the radar (1) as an assembly from the front fascia.

Courtesy of CHRYSLER GROUP, LLC

INSTALLATION

Align the ACC bracket with radar to the front fascia and install the fasteners. Tighten the fasteners securely.
Install the front fascia. Refer to FASCIA, FRONT, REMOVAL AND INSTALLATION .
Perform the ACC Alignment procedure. Refer to MODULE, ADAPTIVE CRUISE CONTROL (ACC), MODULE PROGRAMMING .