LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2025 >> Pacifica Plug-In Hybrid Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Electronic Control Modules (Service Information)) >> Box, MOPAR Connect TELEMATIC >> Removal And Installation >> MOPAR Connect TELEMATIC Box Relay >> Removal

MOPAR Connect TELEMATIC Box Relay: Removal

WARNING: This page is about a different car, the 2025 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL AND INSTALLATION .
  3. Remove the T-box relay (1), taking care not to detach the relay-holder from the mounting bracket.
    GC0178820Courtesy of CHRYSLER GROUP, LLC
scientia non olet · About LEMON Manuals