MOPAR Connect TELEMATIC Box - LHD: Removal
WARNING: This page is about a different car, the 2025 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL AND INSTALLATION .
- Release the lower B pillar trim and move it aside without removing it. Refer to PANEL, B-PILLAR TRIM, LOWER, REMOVAL AND INSTALLATION .
- Disconnect the T-box wire harness connector (1).
- Cut the cable ties (1) and remove the T-box module from the two-sided adhesive velcro behind it.