LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2023 >> Pacifica Touring, Gas >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Heater, Engine Block >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0144482Courtesy of CHRYSLER GROUP, LLC
  1. Clean the block heater sealing surface.
  2. Install the engine block heater (1) and tighten the bolt (2) to the proper torque specification. Refer to TORQUE SPECIFICATIONS  .
  3. Connect the power cord plug to the engine block heater (1).
    GC0178239Courtesy of CHRYSLER GROUP, LLC
  4. Install the generator and hand tighten the lower bolt (1).
    GC0177217Courtesy of CHRYSLER GROUP, LLC
  5. Install and hand tighten the two upper generator bolt (1).
  6. Tighten the upper and lower generator bolts to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
  7. Install the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL AND INSTALLATION .
  8. Install the engine belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION .
  9. Connect the negative battery cable(s). Refer to BATTERY, STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals