LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2022 >> Pacifica Hybrid Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Rear Driveline Module) >> Sensor, Pressure >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different variant/trim than selected.
GC0200283Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the wire harness connector from the pressure sensor (1).
  2. Remove the pressure sensor from the Rear Drive Module (RDM) housing.
scientia non olet · About LEMON Manuals