LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2022 >> Pacifica Hybrid Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Restraints System (Service Information)) >> Sensor, Occupant Detection >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
GC0177252Courtesy of CHRYSLER GROUP, LLC
  1. Position the ODS (1), aligning the integral mounting latches (3) to the seat wire frame (2).
  2. Carefully push the ODS (1) toward the rear of the seat to engage the integral mounting latches (3) with the seat wire frame (2). Be certain all integral mounting latches are attached to the seat wire frame.
    GC0177648Courtesy of CHRYSLER GROUP, LLC
  3. Reach under the back of the front seat cushion frame to access and connect the seat wire harness connector (2) to the ODS (1).
  4. Install the seat cushion and cover. Refer to COVER, SEAT CUSHION, FRONT, REMOVAL AND INSTALLATION .
  5. Install the side shields to the front seat. Refer to SIDE SHIELDS, SEAT CUSHION, FRONT, REMOVAL AND INSTALLATION .
  6. Install the passenger side front seat into the vehicle. Refer to SEAT, FRONT, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals