LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2022 >> Pacifica Hybrid Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Electronic Control Modules (Service Information)) >> Module, Hands Free Liftgate >> Removal And Installation >> Without Trailer Tow >> Removal

Without Trailer Tow: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the rear fascia. Refer to FASCIA, REAR, REMOVAL AND INSTALLATION .
    GC0200338Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the body wiring harness connector (1) from the Hands Free Entry Power Liftgate (HFEPLG) module (2).
    GC0200297Courtesy of CHRYSLER GROUP, LLC
  4. Remove the fasteners (1) securing the HFEPLG module with sensor assembly (2) to the vehicle.
  5. Remove the HFEPLG module with sensor (2) from the vehicle.
scientia non olet · About LEMON Manuals