LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Heater, Engine Block >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable(s). Refer to BATTERY, STANDARD PROCEDURE .
  2. Remove the engine belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION .
  3. Remove the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL AND INSTALLATION .
    GC0177217Courtesy of CHRYSLER GROUP, LLC
  4. Remove the two upper bolts (1) securing the generator.
    GC0178239Courtesy of CHRYSLER GROUP, LLC
  5. Remove the lower bolt (1) and position aside the generator.
    GC0144482Courtesy of CHRYSLER GROUP, LLC
  6. Disconnect the power cord plug from the engine block heater (1).
  7. Remove the bolt (2) and the engine block heater (1).
scientia non olet · About LEMON Manuals