Removal And Installation: Left: Installation
NOTE:
The intake and exhaust solenoids are not interchangeable.
- Install the variable valve timing solenoid seals (1). The seals can be reused if not damaged.
- Refer to the markings made at disassembly and install the exhaust variable valve timing solenoid in the original location.
- Install the exhaust variable valve timing solenoid and securely tighten the mounting bolts (1).
- Connect the electrical connector (2) to the exhaust variable valve timing solenoid.
- Refer to the markings made at disassembly and install the intake variable valve timing solenoid in the original location.
- Install the intake variable valve timing solenoid and securely tighten the mounting bolts (1).
- Attach the wiring harness retainer (2) to the intake variable valve timing solenoid.
- Connect the electrical connector (3) to the intake variable valve timing solenoid.
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
NOTE:
The Cam/Crank Variation Relearn procedure must be performed using the scan tool anytime there has been a repair/replacement made to a powertrain system, for example: flywheel, valvetrain, camshaft and/or crankshaft sensors or components.