LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2021 >> Pacifica Pinnacle, FWD, Gas >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Fan, Cooling >> Removal And Installation >> Removal

Removal And Installation: Removal

multimedia:A supplement to the article is available.
  1. Disconnect and isolate negative battery cable.
    GC0177657Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the cooling fan wiring harness connector (1).
    GC0177862Courtesy of CHRYSLER GROUP, LLC
  3. Detach the coolant vent hose (1) from the cooling fan shroud.
    GC0177613Courtesy of CHRYSLER GROUP, LLC
  4. Remove the left upper cooling fan bolt (1).
    GC0177972Courtesy of CHRYSLER GROUP, LLC
  5. Remove the right upper cooling fan bolt (1).
  6. Remove the belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION , BELLY PAN, FRONT, REMOVAL AND INSTALLATION , and/or BELLY PAN, SIDE, REMOVAL AND INSTALLATION .
    GC0177469Courtesy of CHRYSLER GROUP, LLC
  7. Detach the wire harness retainers (1) from the lower crossmember.
    GC0177370Courtesy of CHRYSLER GROUP, LLC
  8. Remove the front crossmember to cradle bolts (1).
    GC0177241Courtesy of CHRYSLER GROUP, LLC
  9. Remove the right side crossmember bolts (1).
    GC0177472Courtesy of CHRYSLER GROUP, LLC
  10. Remove the left side crossmember bolts (1).
    GC0177349Courtesy of CHRYSLER GROUP, LLC
  11. Remove the left side lower crossmember bolt (1).
    GC0177308Courtesy of CHRYSLER GROUP, LLC
  12. Remove the right side bolt (1) and the lower crossmember.
    GC0178194Courtesy of CHRYSLER GROUP, LLC
  13. Push the radiator forward to allow clearance for the cooling fan to be removed.
    GC0178096Courtesy of CHRYSLER GROUP, LLC
  14. Lifting upwards to release from mounts and remove the cooling fan coming out the bottom.
scientia non olet · About LEMON Manuals