Control Circuit Test

The starter control circuit components should be tested in the order in which they are listed, as follows:

• Starter Relay  - The starter relay is located within the PDC. Refer to CENTER, POWER DISTRIBUTION (PDC) .
• Starter Solenoid  - Refer to DIAGNOSIS AND TESTING  .
• Ignition Switch  - Refer to Ignition Switch and Key Lock Cylinder. 
• Clutch Pedal Position Switch  - If equipped with manual transmission, refer to Clutch Pedal Position Switch  .
• Park/Neutral Position Switch  - If equipped with automatic transmission, refer to Park/Neutral Position Switch  .
• Wire harnesses and connections  - Refer to the appropriate Wiring information.