LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2021 >> 300 Touring, RWD, Gas/Ethanol >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Anti-Lock Brake System (Abs) >> Installation

Module, Anti-Lock Brake System (Abs): Installation

  1. Clean any debris off the mating surfaces of the Hydraulic Control Unit (HCU) and Antilock Brake System (ABS) module.
    NOTE:

    Do not lubricate the ABS module seal.

    GC0170191Courtesy of CHRYSLER GROUP, LLC
  2. A new seal (1) must be installed to properly seal the ABS module (2); DO NOT REUSE ANY ABS MODULE SEALS  .
    GC0170199Courtesy of CHRYSLER GROUP, LLC
  3. Align and install the ABS module (1) to the HCU (2).
    GC0170098Courtesy of CHRYSLER GROUP, LLC
  4. Install and securely tighten the ABS module to HCU mounting fasteners (3).
  5. Install and securely tighten the Integrated Control Unit (ICU) to bracket fasteners.
  6. Install the ICU. Refer to INTEGRATED CONTROL UNIT (ICU), INSTALLATION .
scientia non olet · About LEMON Manuals