Torque Specifications
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Cross-Under Pipe Isolator Mount Bolts (LH and RH) | 23 | 17 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Cross-Under Pipe to Oil Pan Support Bolts | 20 | 15 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Front Exhaust Hanger Bracket to Body | 35 | 26 | - | |
| Exhaust Hanger Bracket to Body | 22 | 16 | ||
| Left Catalytic Converter to Crossunder Pipe Flange Bolts | 29 | 21 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Lower Catalytic Converter Flange Retainer to Cylinder Head Bolts | 27 | 20 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Right Catalytic Converter Support Bracket Bolt | 21 | 15 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Bolts, Upper Catalytic Converter Flange to Cylinder Head | 21 | 15 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Cross-Under Pipe to Exhaust Pipe Clamp | 25 | 18 | - | |
| Right Catalytic Converter Flange to Cross-Under Pipe Clamp | 54 | 40 | - | |
| Heat Shields Fastener | 3 | - | 27 |