LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2019 >> Pacifica LX, Gas >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Column >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the gap hider. Refer to GAP HIDER, STEERING COLUMN SHROUD, REMOVAL AND INSTALLATION .
    GC0177266Courtesy of CHRYSLER GROUP, LLC
  3. Remove the lower steering column pinch bolt (1) DISCARD pinch bolt. 

    Do not start to remove (or break free) Pinch Bolt with an impact wrench/gun. 

    GC0178212Courtesy of CHRYSLER GROUP, LLC
  4. Remove the wire retainer (2) from the steering column.
  5. Remove the steering column nuts (1).
  6. Remove the steering column assembly.
scientia non olet · About LEMON Manuals