LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2019 >> Pacifica LX, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Instrument Panel Cluster (IPC) >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the instrument cluster bezel. Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL AND INSTALLATION .
    GC0177406Courtesy of CHRYSLER GROUP, LLC
  3. Remove the four screws (1) that secure the Instrument Panel Cluster (IPC) to the instrument panel.
  4. Pull the top of the IPC rearward far enough to access and disconnect the instrument panel wire harness connectors from the connector receptacles on the back of the IPC.
  5. Remove the IPC from the instrument panel.
scientia non olet · About LEMON Manuals