LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2019 >> 300 C >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Fan, Cooling >> Installation >> 3.6L Dual Fan

3.6L Dual Fan

GC0144322Courtesy of CHRYSLER GROUP, LLC
  1. Install the fan blade (4) to the fan motor and securely tighten the nut (3).
  2. Install the fan motor assembly to the shroud (6) and securely tighten the bolts (2).
  3. Route the fan motor wiring harness (5) through the fan shroud (6).
    GC0144489Courtesy of CHRYSLER GROUP, LLC
  4. Install the cooling fan assembly (1) into the lower radiator mounts (2).
    GC0144533Courtesy of CHRYSLER GROUP, LLC
  5. Install the cooling fan bolts (2) and tighten to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  6. Connect the cooling fan wire harness connector (1).
  7. Install the air cleaner body. Refer to INSTALLATION .
  8. Connect the negative battery cable.
  9. Operate engine until it reaches normal operating temperature. Check the fan for proper operation.
scientia non olet · About LEMON Manuals