Solenoid, Variable Valve Timing: Removal: Right

Disconnect and isolate the negative battery cable.

Courtesy of CHRYSLER GROUP, LLC
Remove the engine cover (1).
Remove the air cleaner body. Refer to REMOVAL .

Courtesy of CHRYSLER GROUP, LLC

NOTE:
Mark the Variable Valve Timing Solenoid (VVTS) connectors (1) with a paint pen or equivalent so that they may be reinstalled in their original locations.
Mark the intake VVTS (2) and the exhaust VVTS solenoid (4) with a paint pen or equivalent so that they may be reinstalled in their original locations.
Disconnect the VVTS wire harness connector (1).
Remove bolts (3) and pull the VVTS from the cylinder head cover.

Courtesy of CHRYSLER GROUP, LLC
The seal (1) can be reused if not damaged.