LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2019 >> 300 C >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Solenoid, Variable Valve Timing >> Removal >> Left

Solenoid, Variable Valve Timing: Removal: Left

  1. Disconnect and isolate the negative battery cable.
    GC0144028Courtesy of CHRYSLER GROUP, LLC
  2. Remove the engine cover (1).
  3. Remove the air cleaner body. Refer to REMOVAL .
    GC0144208Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Mark the Variable Valve Timing Solenoid (VVTS) wire harness connectors (1) with a paint pen or equivalent so that they may be reinstalled in their original locations.

  4. Mark the intake VVTS (4) and the VVTS (2) with a paint pen or equivalent so that they may be reinstalled in their original locations.
  5. Disconnect the VVTS wire harness connector (1).
  6. Remove the bolts (3) and pull the VVTS from the cylinder head cover.
    GC0144209Courtesy of CHRYSLER GROUP, LLC
  7. The seal (1) can be reused if not damaged.
scientia non olet · About LEMON Manuals