LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2018 >> Pacifica Touring Plus, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Electronic Control Modules (Service Information) 500X) >> Module, Radio Frequency (RF Hub) >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2017 Fiat 500X. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that the Remote Frequency Hub Module (RFHM) is not damaged.
  2. Place the RFHM to the vehicle and tighten the nuts.
  3. Connect the electrical connectors to the RFHM.
  4. Install the rear quarter trim panel. Refer to PANEL, QUARTER TRIM, REMOVAL AND INSTALLATION .
  5. Connect the diagnostic scan tool and perform the learn procedure.
scientia non olet · About LEMON Manuals