LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2018 >> Pacifica Touring Plus, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Electronic Control Modules (Service Information) 500X) >> Module, Body Control (BCM) >> Removal And Installation >> Right Hand Drive >> Installation

Right Hand Drive: Installation

WARNING: This page is about a different car, the 2017 Fiat 500X. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that the Body Computer assembly is not damaged.
  2. Connect the electrical connections on the rear side of the assembly.
  3. Put the body computer unit in its position and engage the retainers to the bracket.
  4. Connect the electrical connections on the front side of the assembly.
  5. Install the cowl trim panel. Refer to PANEL, COWL TRIM, REMOVAL AND INSTALLATION .
  6. Install the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL AND INSTALLATION .
  7. Connect the negative battery terminal.
  8. Perform BCM programming.
scientia non olet · About LEMON Manuals