LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2018 >> Pacifica L, Gas >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Link, Stabilizer Bar >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0177286Courtesy of CHRYSLER GROUP, LLC
  1. Install the stabilizer bar link to the strut and install the stabilizer bar link nut (3), and tighten to the proper specification. Refer to FRONT, TECHNICAL SPECIFICATIONS .
    GC0178112Courtesy of CHRYSLER GROUP, LLC
  2. Install the lower stabilizer bar link to the stabilizer bar and install the stabilizer bar link mounting nut (3), and tighten to the proper specification. Refer to FRONT, TECHNICAL SPECIFICATIONS .
  3. Install the tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
  4. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals