LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2018 >> Pacifica L, Gas >> Repair and Diagnosis >> Electrical >> Starter >> Starting System (Service Information) >> Relay, Power Control >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Position the PCR to the PCR bracket and secure using two nuts.
  2. Connect both of the B+ eyelet terminals to the PCR and secure them using two nuts.
  3. Connect the wire harness connector to the PCR.
  4. Install the PCR cover.
  5. Install the air cleaner assembly. Refer to AIR CLEANER, REMOVAL AND INSTALLATION .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals