LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Fan, Cooling >> Removal >> 3.6L Dual Fan

3.6L Dual Fan

NOTE:

If replacing the fan blades. The dual fan blades can be replaced separately from the motor. Single motor fan blades are balanced to the motor and must be replaced as a fan/motor assembly.

  1. Disconnect and isolate the negative battery cable.
  2. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL .
    GC0144533Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the cooling fan wire harness connector (1).
  4. Remove the cooling fan mounting bolts (2).
  5. Remove the radiator cooling fan assembly (3) from vehicle.
    GC0144322Courtesy of CHRYSLER GROUP, LLC
  6. Removing the fan motor wiring harness (5) from the fan shroud (6).
  7. Remove the fan blade (4) from fan motor.
  8. Remove bolts (2) that support the fan motor to the shroud.
scientia non olet · About LEMON Manuals