LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Link, Spring >> Installation

Link, Spring: Installation

NOTE:

Using a suitable tool, move the knuckle lower bushing inward to ease installation of the spring link onto the knuckle.

GC0170227Courtesy of CHRYSLER GROUP, LLC
  1. Position the spring link (3) in the vehicle and install the spring link to crossmember bolt (2). Do not tighten bolt at this time. 
  2. Install the spring link to knuckle bolt (1). Do not tighten bolt at this time. 
  3. Install the rear spring.
    GC0170540Courtesy of CHRYSLER GROUP, LLC
  4. Position a suitable jack (1) under the spring link.
  5. Install the shock absorber Do not tighten bolt at this time.  . Refer to SHOCK ABSORBER, SUSPENSION, INSTALLATION .
  6. Remove the jack and lower the vehicle.
  7. Position the vehicle on an alignment rack. Raise vehicle as necessary to access mounting bolts.
  8. Tighten spring link to crossmember bolt to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
  9. Tighten the spring link to knuckle bolt to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
  10. Tighten the shock absorber bolts to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
  11. Perform wheel alignment. Refer to WHEEL ALIGNMENT, STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals