LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Link, Compression >> Installation

Link, Compression: Installation

  1. Position the compression link in the vehicle.
    GC0170389Courtesy of CHRYSLER GROUP, LLC
  2. Install the compression link to crossmember bolt (1). Do not tighten bolt at this time. 
  3. Install the compression link to knuckle bolt (2). Do not tighten bolt at this time. 
    GC0170329Courtesy of CHRYSLER GROUP, LLC
  4. Install the lower shock absorber bolt (1). Do not tighten bolt at this time. 
  5. Install the tire and wheel assembly. Refer to INSTALLATION .
  6. Remove the support and lower the vehicle.
  7. Position the vehicle on an alignment rack/drive-on lift. Position the vehicle to access the compression link fasteners.
  8. Tighten the compression link bolts to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
  9. Tighten the lower shock absorber bolt to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
  10. Perform wheel alignment. Refer to WHEEL ALIGNMENT, STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals