LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.6L Engine (Service Information)) >> Lubrication >> Sensor, Oil Temperature >> Installation

Sensor, Oil Temperature: Installation

WARNING: This page is about a different variant/trim than selected.
GC0162119Courtesy of CHRYSLER GROUP, LLC
  1. Install the oil temperature sensor (1) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  2. Connect the oil temperature sensor wire harness connector (2).
  3. Install the upper and lower intake manifolds. Refer to MANIFOLD, INTAKE, INSTALLATION  .
scientia non olet · About LEMON Manuals