LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Electronic Control Modules (Service Information)) >> Module, Memory >> Installation

Module, Memory: Installation

WARNING: This page is about a different car, the 2018 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
GC0144638Courtesy of CHRYSLER GROUP, LLC
  1. Position the Memory Seat Module (MSM) (2) to the bracket (4) and connect all electrical connectors to the rear of the MSM.
    CAUTION:

    Properly align the Memory Seat Module (MSM) retaining tabs to the bracket, prior to engagement. Failure to follow these instructions may result damage to the MSM retaining tabs.

  2. Install the MSM into the bracket and engage the two rear MSM retaining tabs to the bracket.
  3. Engage the two front MSM retaining tabs (3 and 5) to the bracket by carefully pulling down on the front of the MSM.
  4. Connect all the electrical connectors (1) to the front of the MSM.
  5. Install the driver seat. Refer to SEAT, FRONT, INSTALLATION .
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals