LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Electronic Control Modules (Service Information)) >> Module, Keyless Ignition Node (Kin) >> Installation

Module, Keyless Ignition Node (Kin): Installation

WARNING: This page is about a different car, the 2018 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
GC0162393Courtesy of CHRYSLER GROUP, LLC
  1. Push the Keyless Ignition Node (KIN) into the instrument panel until it snaps into place.
  2. Reach through the Integrated Center Stack (ICS) screen opening and connect the KIN electrical connector.
  3. Position the instrument cluster bezel (2) and hand tap to engage the retaining clips.
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals