Coil, Ignition: Removal: 3.6L

Disconnect and isolate the negative battery cable.

Courtesy of CHRYSLER GROUP, LLC
Remove the engine cover (1).

Courtesy of CHRYSLER GROUP, LLC
If removing the ignition coils from cylinders 1, 3 or 5 on the right side of the engine, first remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL .

Courtesy of CHRYSLER GROUP, LLC
If removing the ignition coils from cylinders 2, 4 or 6 on the left side of the engine, first remove the upper intake manifold (2) and insulator. Refer to MANIFOLD, INTAKE, REMOVAL .

Courtesy of CHRYSLER GROUP, LLC

NOTE:
The left side ignition coils are shown in the illustration, the right side ignition coils are similar.
Unlock and disconnect the wire harness connector (1) from the ignition coil.
Remove bolt (3) and pull the ignition coil (2) from cylinder head cover opening with a slight twisting action.