LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery (Service Information) >> Cables, Battery >> Installation >> Positive - Engine Compartment

Positive - Engine Compartment

GC0080014Courtesy of CHRYSLER GROUP, LLC
  1. Position the battery positive cable in the engine compartment.
  2. On the 3.6L and 5.7L secure the battery positive cable to the routing clips located at the back of the engine.
    GC0080015Courtesy of CHRYSLER GROUP, LLC
  3. On the 5.7L secure the battery positive cable to the routing clip located at the back of the starter.
    GC0080013Courtesy of CHRYSLER GROUP, LLC
  4. Install the battery positive cable to starter fastener.
    GC0080012Courtesy of CHRYSLER GROUP, LLC
  5. Install the battery positive cable to bulkhead fastener.
  6. Install the right front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, INSTALLATION .
  7. Lower the vehicle.
    GC0170363Courtesy of CHRYSLER GROUP, LLC
  8. Connect the negative battery cable to the Intelligent Battery Sensor (IBS) M8 stud (1) and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
  9. Install the spare tire cover.
scientia non olet · About LEMON Manuals