LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Outlet, Power, 12 V >> Removal

Outlet, Power, 12 V: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
    GC0143808Courtesy of CHRYSLER GROUP, LLC
  2. Look inside and note position of the retaining bosses (2).
  3. Insert Remover, Power Outlet (special tool #10246, Remover, Power Outlet) (1) into the retaining bosses (2) of the power outlet.
  4. Pull out the base through the mounting ring by gently rocking the tool.
    GC0143809Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the harness connector (1) from the power outlet (2).
  6. Set the base aside and remove the base mount ring.
scientia non olet · About LEMON Manuals