LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Memory >> Installation

Module, Memory: Installation

NOTE:

Depending on how equipped, more memory seat module electrical connectors may be present than shown in the illustration.

GC0144638Courtesy of CHRYSLER GROUP, LLC
  1. Position the Memory Seat Module (MSM) (2) to the bracket (4) and connect all electrical connectors to the rear of the MSM.
    CAUTION:

    Properly align the Memory Seat Module (MSM) retaining tabs to the bracket, prior to engagement. Failure to follow these instructions may result damage to the MSM retaining tabs.

  2. Install the MSM into the bracket and engage the two rear MSM retaining tabs to the bracket.
  3. Engage the two front MSM retaining tabs (3 and 5) to the bracket by carefully pulling down on the front of the MSM.
  4. Connect all the electrical connectors (1) to the front of the MSM.
  5. Install the driver seat Refer to SEAT, FRONT, INSTALLATION .
  6. Reconnect the negative battery cable.
  7. Perform the Power Seat System Verification test. Refer to STANDARD PROCEDURE .
  8. Verify proper memory seat system operation.
scientia non olet · About LEMON Manuals