Radiator, Engine Cooling: Installation: 3.6L
- Install the cooling fan assembly onto the radiator and tighten the bolts to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
- Position the radiator (2) into the lower mounting isolators on the radiator lower support.
- Push the radiator rearward, engaging the radiator (1) into the upper mount.
- Install both upper radiator mount covers (2) and tighten the fasteners (1) to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
- Install the A/C service port bracket (1) and tighten the bolt (2) to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
- Connect the cooling fan wire harness connector.
- Install the upper radiator hose
- Install the lower radiator hose.
- Install the right side condenser mounting bracket bolts (2) and tighten the bolts to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
- Install the liquid line support bracket and tighten the fastener (1) to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
- Install the left side condenser mounting bracket bolts (2) and tighten the bolts to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
- Install the transmission oil cooler mounting bracket and tighten the bolt (1) to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
- Install the multipurpose bracket. Refer to BRACKET, MULTIPURPOSE, INSTALLATION .
- Install the belly pan. Refer to BELLY PAN, INSTALLATION .
- Fill the cooling system. Refer to STANDARD PROCEDURE .
- Install the engine cover.