LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2017 >> 200 LX, Eng CD ED6 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Pump, Water >> Installation >> 2.4L

Pump, Water: Installation: 2.4L

GC0098471Courtesy of CHRYSLER GROUP, LLC
  1. Position the water pump (4) into position with a new gasket (8).
  2. Install the water pump bolts (3).
  3. Tighten the water pump bolts to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
  4. Install the water pump pulley (2). Install the pulley bolts (1) and tighten to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
  5. Install the serpentine belt Refer to BELT, SERPENTINE, INSTALLATION .
  6. Install the belly pan Refer to BELLY PAN, INSTALLATION .
  7. Install the right front wheel house splash shield Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, INSTALLATION .
  8. Install the tire/wheel assembly.
  9. Fill the cooling system.
  10. Perform the Air Evacuation and Coolant Fill Procedure. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals