LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2017 >> 200 LX, Eng CD ED6 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Powertrain Control >> Removal >> 3.6L

Module, Powertrain Control: Removal: 3.6L

CAUTION:

Do not disconnect the Powertrain Control Module (PCM) electrical connectors before the ignition key is in the off position and the battery cable disconnected. If these steps are not performed damage to the PCM may result from a voltage spike.

GC0159669Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the battery negative cable.
  2. Disconnect the Power Train Control module electrical connector (1).
  3. Remove the nuts (2, 3) that secure the PCM to the PCM mount
    GC0159726Courtesy of CHRYSLER GROUP, LLC
  4. If required, remove the PCM mount (3).
scientia non olet · About LEMON Manuals