Sensor, Coolant Temperature: Installation: 2.4L

Fig 1: Thermostat Housing, Hose Outlets/Inlets & Coolant Temperature Sensor

Courtesy of CHRYSLER GROUP, LLC

1. Install the engine coolant temperature sensor (2) and tighten the sensor to the proper specification. Refer to SPECIFICATIONS .
2. Connect the connector.
   Fig 2: Battery Tray, PCM Mount & Bolts

   Courtesy of CHRYSLER GROUP, LLC
3. Install the PCM mount (3) to the battery tray (1).
4. Install the PCM mount bolts (2 & 4).
5. Install the PCM. Refer to MODULE, POWERTRAIN CONTROL, INSTALLATION .
6. Install the battery. Refer to BATTERY, INSTALLATION .
7. Fill the cooling system. Refer to STANDARD PROCEDURE .
8. Install the engine cover.
9. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.