Fan, Cooling: Installation: 3.6L

Fig 1: Removing/Installing Cooling Fan Assembly

Courtesy of CHRYSLER GROUP, LLC

Guide the cooling fan assembly into position through the bottom of the engine compartment.

Fig 2: Releasing/Inserting Fan From Mounting Brackets
Courtesy of CHRYSLER GROUP, LLC
Once into position, insert the lower tabs into the mounting brackets on the radiator.

Fig 3: Radiator Mount Brackets & Fasteners
Courtesy of CHRYSLER GROUP, LLC
Install the right lower radiator mount bracket (3) and securely tighten the fasteners (4).
Install the left lower radiator mount bracket (2) and securely tighten the fasteners (1).

Fig 4: Lower Radiator Air Deflector & Push Fasteners
Courtesy of CHRYSLER GROUP, LLC
Place the lower radiator air deflector (1) into position and install the five push fasteners (2).

Fig 5: Belly Pan, Front Fascia Lower Closeout Panel & Bolts
Courtesy of CHRYSLER GROUP, LLC
Install the lower fascia closeout panel (2) and securely tighten the fasteners.
Install the belly pan. Refer to BELLY PAN, INSTALLATION .

Fig 6: Cooling Fan Wire Harness Connector & Bolts
Courtesy of CHRYSLER GROUP, LLC
Install the two cooling fan assembly retaining bolts (1) and tighten the bolts to the proper specification. Refer to SPECIFICATIONS .
Connect the wire harness connector (2) to the cooling fan assembly.
Place the upper front fascia closeout into position and install the push fasteners.
Install the engine cover.
Connect the negative battery cable.