2.4L Torque Specifications
TORQUE SPECIFICATIONS - 2.4L
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | NEW FASTENER * |
|---|---|---|---|---|
| Accessory Drive Belt Tensioner Bolt | 26 | 19 | - | - |
| Accessory Drive Belt Idler Pulley Bolt | 28 | 21 | - | - |
| Block Heater | 2 | - | 21 | - |
| Condenser to Radiator | 6 | - | 53 | - |
| Coolant Reservoir | 9 | - | 80 | - |
| Coolant Reservoir Return Tube to Airbox Nut | 16 | - | 142 | - |
| Coolant Reservoir Supply Tube Nut to Stud | 9 | - | 80 | - |
| Coolant Reservoir Supply Tube to Ball Stud Nut | 5 | - | 44 | - |
| Coolant Return Tube to Water/Coolant Pump Inlet Pipe | 45 | 33 | - | - |
| Coolant Return Tube to Oil Filter Housing | 40 | 30 | - | - |
| Coolant Supply Tube to Oil Filter Housing | 9 | - | 80 | - |
| Coolant Supply Tube to Thermostat Housing | 9 | - | 80 | - |
| Engine Coolant Temperature (ECT) Sensor | 7 + 720° (two complete rotations) | - | 62 + 720° (two complete rotations) | - |
| Fan Shroud to Radiator Mounting | 6 | - | 53 | - |
| Heater Hose to Transmission Mount | 9 | - | 80 | - |
| Radiator Lower Isolator Bracket to Crossmember | 8 | - | 70 | - |
| Thermostat Housing | 10 | - | 89 | - |
| Transmission Oil Cooler Line Bracket | 9 | - | 81 | - |
| Transmission Oil Cooler to Condenser | 9 | - | 81 | - |
| Water/Coolant Pump Bolts and Nut | 10 | - | 89 | - |
| Water/Coolant Pump Inlet Tube | 9 | - | 80 | - |
| Water/Coolant Pump Inlet Pipe Support Bracket Bolt | 10 | - | 89 | - |
| *NEW FASTENER: Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. | ||||