LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2015 >> 200 LX, Eng CD ED8 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Rear Driveline Module) >> Sensor, Pressure >> Removal >> Pressure Sensor Removal

Pressure Sensor Removal

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Pressure Sensor And Pump Motor Electrical Connectors
GC0159204Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the wire harness connector from the pressure sensor (1).
  2. Position a drain pan under the differential and remove the pressure sensor (1) from the RDU housing.
scientia non olet · About LEMON Manuals