3.6L Torque Specifications
TORQUE SPECIFICATIONS - 3.6L
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | NEW FASTENER* |
|---|---|---|---|---|
| Catalytic Converter Flange to Cylinder Head Bolts | 23 | 17 | - | - |
| Catalytic Converter Support Bolts | 28 | 21 | - | - |
| Cross-under Pipe to Front Catalytic Converter Flange Nuts | 25 | 18 | - | - |
| Cross-under Pipe Support Bracket Bolt | 23 | 17 | - | - |
| Cross-under Pipe to Y-pipe Flange Nuts | 25 | 18 | - | - |
| Intermediate Shaft Support Bracket Upper Bolts | 23 | 17 | - | - |
| Oxygen Sensors | 50 | 37 | - | - |
| Resonator/Muffler Assembly Support Isolators to Body Bolts | 25 | 18 | - | - |
| Resonator/Muffler Assembly to Y-pipe Band Clamp | 55 | 41 | - | - |
| Y-pipe Support Bracket Bolts | 25 | 18 | - | - |
| Y-pipe to Rear Catalytic Converter Flange Nuts | 25 | 18 | - | - |
| *NEW FASTENER: Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. | ||||