Standard Procedure: Draining

WARNING: This page is about a different car, the 2013 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

DO NOT WASTE reusable coolant. If solution is clean, drain coolant into a clean container for reuse.

Remove radiator pressure cap.
Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
If equipped, remove the underbody splash shield.

Fig 1: Radiator Petcock
Courtesy of CHRYSLER GROUP, LLC

WARNING:
Do not remove cylinder block drain plugs or loosen radiator draincock with system hot and under pressure. Serious burns from coolant can occur.

NOTE:
Typical petcock drain plug shown in the illustration.
Loosen radiator petcock.
Drain coolant into a clean container.
If necessary, to perform a complete coolant drain of the engine, remove the drain plug from the engine block if equipped.