3.0L Diesel

WARNING: This page is about a different car, the 2013 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION for 3.6L or BODY, AIR CLEANER, INSTALLATION for 5.7L or BODY, AIR CLEANER, INSTALLATION for 6.4L.
Drain the cooling system. Refer to STANDARD PROCEDURE .
Remove upper radiator hose.

Fig 1: Cooling Fan Electrical Connector, Cooling Fan Mounting Bolts & Radiator Cooling Fan Assembly
Courtesy of CHRYSLER GROUP, LLC
Remove radiator fan assembly (3). Refer to FAN, COOLING, REMOVAL .
Raise the vehicle.
Remove the belly pan.

Fig 2: Lower Radiator Hose
Courtesy of CHRYSLER GROUP, LLC
Remove lower radiator hose (1).
Lower vehicle.
Remove the front bumper fascia. Refer to FASCIA, FRONT, REMOVAL .

Fig 3: Air Deflectors
Courtesy of CHRYSLER GROUP, LLC
Remove the air deflectors (1).

Fig 4: Upper Radiator Mounting Brackets Bolts
Courtesy of CHRYSLER GROUP, LLC

CAUTION:
Bolts are installed with threadlocker. Use hand tools to remove the upper radiator mounting bolts.
Remove upper radiator mounting brackets bolts (3).
Remove the upper radiator brackets (1) from the radiator supports (2)
Remove the lower condenser mounting bolts.

Fig 5: Support Bolt
Courtesy of CHRYSLER GROUP, LLC
Remove the support bolt (2) located between the cooler lines.
Using a suitable hanger. Support the condenser and remove the right side upper mounting bolt.
Separate condenser assembly from radiator.
Tilt radiator toward engine and remove radiator from vehicle.