LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2014 >> 300 SRT-8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Engine Cooling System) >> Engine >> Heater, Engine Block >> Removal >> 3.6L

Heater, Engine Block: Removal: 3.6L

WARNING: This page is about a different car, the 2013 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise vehicle on hoist.
  2. Remove the A/C compressor. Refer to COMPRESSOR, A/C, REMOVAL .
    Fig 1: 3.6L Engine Block Heater & Cylinder Block
    GC0144482Courtesy of CHRYSLER GROUP, LLC
  3. Detach power cord plug from block heater (1).
  4. Remove block heater attaching screw (2) located below heater terminals.
  5. Remove block heater from cylinder block.
scientia non olet · About LEMON Manuals