Dismounting/Mounting Procedures: Notes
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2020 RAM 3500 HD, 2020 RAM 2500 HD, 2020 RAM 1500 Classic, 2020 RAM 1500, and 2019 RAM 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
The tire should be dismounted from the wheel using the tire changer manufacturer's instructions. Use the following information to avoid damage during the dismounting/mounting procedures.
CAUTION:
The TPM system has been optimized for the original equipment tires and wheels. TPM system pressures have been established for the tire size equipped on your vehicle. Undesirable operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
NOTE:
If a tire pressure sensor has been replaced, the tire pressure sensors must be retrained. See RESET PROCEDURES .
NOTE:
Wheels and tires are match-mounted at the factory. Before dismounting a tire from its wheel, a reference mark should be placed on the tire at the valve stem location, to ensure that it is remounted in the original position on the wheel. For match-mounting procedures, refer to appropriate manufacturer service information.