Coil, Ignition: Installation: 5.7L/6.4L

Fig 1: Removing/Installing Ignition Coil

Courtesy of CHRYSLER GROUP, LLC

1. Before installing coil(s), apply dielectric grease to the inside of spark plug boots (1).
   Fig 2: Ignition Coil Mounting Bolts - 5.7L/6.1L

   Courtesy of CHRYSLER GROUP, LLC
2. Position the ignition coil into cylinder head and push both spark plug boots onto each spark plug.
3. Install the two coil mounting bolts (3) and tighten to 12 N.m (106 in. lbs.).
4. Connect the electrical connector (1) to the coil and lock connector.
5. Connect the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).